Suction Collator
DSC-10 / 60i
The high and intelligent DSC-10/60i suction towers are connectable up to 6 towers, delivering superior performance whilst maintaining complete accuracy. Each tower of 10 stations becomes totally independent and can be used to feed single or multiple sheets from the same bin....

Suction Collator
DSC-10 / 20
The DSC-10/20 high performance suction feed vercital collator, ideal for the demands of the short run, fast turnarond print market. The high speed DSC-10/20 features deep capacity bins for high production and an optional straight/offset staker collating sets....

Collator
DFC-101
DFC-101 are high speed,easy to use friction collators, with reliable feeding and accurate stacking. Working standalone or as part of a collating/booklet making system with the DBM-150 booklet maker,the DFC-101 offers a cost effective solution for finishing needs....

Sheet Feeder
DSF-6000
DSF-6000 document sheet feeder is ideal for customers with medium to high production volume demands. It can process pre-collated digital or offset printed documents at a maximum production rate of 600 sheets per minute,which is able to connect systems of DBMS and DBM-600....

Sheet Feeder
DSF-2200
DSF-2200 sheet Feeder is the ideal solution for short and medium runs. DSF-2200 proudly offers superior feeding perdormance employing vacuum belt feeding mechanism, plus static eliminator device and air-knife sheet separation ensure accurate and consistent feeding. The OMR (Optical Mark Recognition)...

Saddle Stitcher
DBMS
The precise and user friendly DBMi Saddle System provides a large variety of book formats, including the increasing popular A4 lanscape size right down to formats as small as 90mm x 75mm. With quick "make ready" times in approximately 60 seconds, and book thickness up to 120 pages. The DBMi Saddle S...

Booklet Marker
DBM-600
DBM-600 booklet maker inherits features of the best flagship sales model with reproduction of the latest technology. The machine provides a large variety of book formats from A4 landscape to 105 mm x 75 mm. More importantly, the ease of use has achieved by several new function and PC control that en...

Booklet Maker
DBM-350
The DBM-350 is booklet maker with speeds of up to 3000 booklets per hour. with fully automatic and fast setup, it is an extremely user-friendly and requires minimal operator training. This flexible booklet maker enables to operate various ranges of application both offset and digital. The DBM-350 of...

Booklet Maker
DBM-150
The DBM-150 is a highly versatile booklet maker capable of stand alone/hand-feed operation or connection to a choice of friction or saction collators and Duplo`s DSF-2200 digital printed sheet feeder. The operating speed is up to 2.400 booklet per hour and most of the setup is automatic making this ...

Booklet Maker
DBM-60S
The DBM-60S stitches (corner/side) up to 50 sheets (80gsm) of A3 (LEF) paper. it boast a high speed of 4.500 sets per hour. As an additional feature, it is equipped with a batch function where you can set the interval between sets from 0 - 30 seconds....

Slitter/Cutter/Creaser
SCC
The Duplo SCC is unique product designed to enchance the productivity of Duplo near-line booklet-making systems using full bleed digital color sets and mixed color and black and white sets. Part of the Duplo System 5000 range, the SCC is an optional unit designed specifically for the digital color u...

Trimmer
DKT-200
DKT-200 is located after the DBM-500T on the system 5000. As soon as the foredge has been trimmed by the DBM-500T, the DKT-200 trims the top and bottom margins to provide three knife trimming. The optional gutter cut and 2-hole punch enables the System 5000 to increase its production and procedure v...

Trimmer
DBM-600T
The DBM-600T is a face-trimming unit for the DBM-600.The DBM-600 stitches and folds collated sheets to make booklets.The DBM-600T finishes each booklet by trimming the open edge.You can control the DBM-600T from the DBM-600 control panel.The maximum trimming capacity is 50 sheets(80gsm)....

Square Spine
DSS-350
The DSS-350 designed to give a perfect bound-book finish to stich booklet with no damage to the spine. The square finishing is getting popular especially in digital print market. The flat appearance of booklets provides many benafits, not only does it allow for easy storage, but also provides the pr...

Stacker
DCR-ST
The DCR-ST is a cross stacking machine, it can be connected to a collator to either straight or cross stack sets. The intelegent DCR-ST stops as soon as the stacker has reached full capacity, this allows the system to be left unattended. In addition, DCR-BP bypass works as bypass to deliver the sets...

Stacker
DBM-400STR
The DBM-400STR fits to the right of the collator and is used to stack (straight or offset) each collated set at a maximum of 10.000 sets per hour. The DBM-400STR has a built in descending stacker which simply wheels away when full....

Stacker
DBM-400STL
The DBM-400STL fits to the left of the collator and is used to stack (straight or offset) each collated set at a maximum of 10.000 sets per hour. The DBM-400STL has a built in descending stacker which simply wheels away when full....

Lift-up unit (Reject to right direction)
LUR
The LUR is a connecting device for the DC-10/60 and DBM-400STR high-speed stacker, which transfer and lifts sets up to the DBM-400STR input height. any mis-collated sets are delivered to the integrated reject tray, without stopping the machine in order to minimize downtime....

Staple Punch
DFC-S II
DFC-S II is the industry's first stapler module for both "Traditional Staple Binding" and unique "Punch Hole Bind(PHB)" by changing staple head. PHB eliminates the need for metal staples and combines hole punch and staple. The safe, economical, and environment friendly stapler module with DFC collat...